Skip to main content

The Waterworks

Sacramento recently changed their laws to allow water to be distributed via plastic PEX tubing. (Plumbers resisted this change for years as PEX is much easier and faster to install than copper tubing, hence it gives them less billable hours.) These manifold systems (hot on the left, cold on the right) will reduce the amount of wasted water when one is waiting for hot water to get to a faucet. This form of distribution will also minimize wild temperature swings when one is taking a shower and someone else turns on a faucet somewhere in the house. Or so they say, we'll see..

The big benefit is that if one should want to shut off the water to just one fixture, it is easy to do so.

Comments

Popular posts from this blog

Fridge is in

The kitchen cabinet bases are all installed, the only appliance we have placed is the fridge. The others will go in over the next week or so....you can see the Eucalyptus veneer on our cabinets....yes, they are from IKEA.....it has been a lot of work for Jeff to put them together, but they were significantly less expensive than the other choices we looked at.

3rd Floor bathroom progress

One of the cool things about the house is that when taking a shower in the 3rd floor bathroom, ones head will be in the skylight dome....Do they issue tickets for flashing a helicopter? You can also see that the HVAC (heating, ventilation and air conditioning) guys started last week. They started to pull duct work up to the air exchanger and fan on the 3rd floor.... All 4 of the toilets in the house are wall mounted Geberit low flow toilets with dual flush mode. You can see the `carrier' for the toilet in the middle of this pic. The tank for the toilet is hidden in the wall cavity. We bought almost all of our plumbing fixtures online. The sinks and toilets were purchased from Ira Wood & Sons in Kentucky. They have an excellent website for comparing products: http://store.yahoo.com/irawoodinc/tewamotosy.html

Out of the gutter and into the cold..

Although the stucco guys completed their job a couple of weeks ago, some minor cracks developed in 3 areas and they have come back to patch them up..... Having the scaffold up for the stucco guys allowed our gutter guy to hang the final piece.... On Wednesday of this week the guys from Airsmiths installed the air conditioning condenser...If you're wondering if that is the American Standard Allegiance 14 Super Efficiency Condenser, you would be right! It is made in Texas in the same factory that Trane air conditioners are made at. http://www.americanstandardair.com/Products.asp?Section=homeOwners&ProductID=7&CategoryID=16&SuperCategoryID=1