Skip to main content

Doors and Water Pipes

The pic below shows Jeff's brother Scott finishing up the framing of a door, every door opening was custom made as we have pivot hinge doors that will not be hinged on the side of the frame but on the top and bottom.

In the background is Adam on a ladder doing soldering of the copper pipe that will go from the solar hot water collector down to the garage where the hot water tank will be located.

Comments

Popular posts from this blog

Out of the gutter and into the cold..

Although the stucco guys completed their job a couple of weeks ago, some minor cracks developed in 3 areas and they have come back to patch them up..... Having the scaffold up for the stucco guys allowed our gutter guy to hang the final piece.... On Wednesday of this week the guys from Airsmiths installed the air conditioning condenser...If you're wondering if that is the American Standard Allegiance 14 Super Efficiency Condenser, you would be right! It is made in Texas in the same factory that Trane air conditioners are made at. http://www.americanstandardair.com/Products.asp?Section=homeOwners&ProductID=7&CategoryID=16&SuperCategoryID=1

Controlling the weather

We installed a Weathermatic irrigation system controller.  It is connected to an on-site weather station that monitors temperature, rainfall, windspeed, and humidity. As the seasons change, it automatically adjusts the station timing, very handy! UPDATE:  We had nothing but trouble with this controller and in 2016 we replaced it with a dramatically better one from Rachio. See it here: https://www.rachio.com/ Better yet, the City of Sacramento has a rebate program to replace old controllers with `smart' controllers like the Rachio, check it out here: https://www.cityofsacramento.org/Utilities/Conservation/Rebates/River-Friendly-Landscape-Rebate  

Main patio just before it was completed

Our installer was Lee Reveles Landscape, HIGHLY recommended, they did excellent work...